Industrial
Dallas Central Plant Upgrade
1,240 clashes cleared before install, so the plant was built once with zero rework.
- Scale
- 1.2M sq ft campus, 18 MW plant, 12 floors
- Service
- MEP BIM Coordination
- Location
- Dallas, TX
Construction & BIM · MEP Services
MEP Resolved in the Model, Installed Once
MEP drives most field conflicts and a large share of construction cost. We coordinate HVAC, power, plumbing and fire protection as one system, so trades fit once.
See What Trade Conflicts Cost You- Every trade in one modelMechanical, electrical, plumbing, fire.
- Ceiling zones protectedServices fit by design.
- Fabrication-readySpools and shop drawings.
- Checked before releaseSenior review on every set.
MEP Coordination
Mechanical BIM
Electrical BIM
Plumbing BIM
- 20+Years’ experience
- 1,500+Projects supported
- 350+Engineering professionals
- 80%Repeat clients
Where margin leaks
Trade Conflicts Cost Your Margin
Every MEP clash found on site means rework, RFIs, idle trades and lost days, paid from your margin.
Trades Fighting for Space
- Where margin leaks
- Ducts, pipes, conduit and sprinklers routed apart collide in ceilings, shafts and risers.
- What we fix
- Every system routed together in one coordinated model, checked before release.
Shop Drawings Rejected
- Where margin leaks
- Uncoordinated trade drawings are rejected at review. Installs wait and crews stand idle.
- What we fix
- Shop drawings produced from the coordinated model, so they agree with every trade.
Field Fabrication
- Where margin leaks
- Pipe and duct cut to fit on site wastes labor and material on every floor installed.
- What we fix
- Spool drawings that let you prefabricate pipework with confidence.
Access Missed
- Where margin leaks
- Equipment that fits but cannot be serviced fails handover and has to be relocated.
- What we fix
- Access and maintenance clearances checked for every piece of equipment.
9 services, one team
MEP Services We Deliver
One senior-checked team delivers every service to your standards, so nothing falls between providers.
01MEP Coordination
MEP coordination of mechanical, electrical, plumbing and fire in one model. Every zone checked first, so trades install once.
Explore service- 02
Mechanical BIM
Mechanical BIM that coordinates HVAC, piping and equipment before install. Checked to ASHRAE, SMACNA, AS 1668 and AS 4254.
Explore service - 03
Electrical BIM
Electrical BIM that routes conduit, tray and rooms before rough-in. Coordinated with all trades, checked to NEC, AS/NZS 3000.
Explore service - 04
Plumbing BIM
Plumbing BIM that checks slopes, sleeves and routes before walls close. Coordinated with all trades to IPC, UPC and AS/NZS 3500.
Explore service 
05Mechanical Shop Drawings
Ductwork shop drawings ready for fabrication, coordinated with all trades and checked to SMACNA, IMC and AS 4254.
Explore service
06Electrical Shop Drawings
Coordinated electrical shop drawings, checked to the NEC and AS/NZS 3000, so crews install right first time and pass inspection.
Explore service
07Plumbing Shop Drawings
Coordinated plumbing shop drawings with slopes, inverts and sleeves checked to the IPC, UPC and AS/NZS 3500, so crews install once.
Explore service
08Fire Protection Shop Drawings
Fire protection shop drawings prepared to NFPA 13 and AS 2118.1. Coordinated with every trade for first-time approval and one install.
Explore service
09Plumbing Spool Drawings
Fabrication-ready plumbing spool drawings to ASME B31.9, the IPC, AS 4041 and AS/NZS 3500, so spools fit on site the first time.
Explore service
Who we work with
Built for the Teams
That Carry the Risk
MEP Contractors
Coordinated shop and spool drawings your crews can prefabricate and install from.
MEP Engineers
Design models coordinated with structure and architecture before tender.
General Contractors
One coordinated MEP model that keeps trades sequenced.
Fire Protection Contractors
Sprinkler layouts coordinated with every other service and checked to code.
- We work in
- Autodesk Revit
- Navisworks
- AutoCAD MEP
- Fabrication CADmep
- Your templates and standards
How it works
From Brief to Release
One accountable team, a clear schedule and a senior check before anything is released.
- 01
Share Your Documents
Send design drawings, models and specs. We confirm scope, trades and release dates.
- 02
Model and Coordinate
All MEP trades modeled and federated with structure, zone by zone.
- 03
Detail for Fabrication
Shop and spool drawings produced directly from the coordinated, clash-free model.
- 04
Check and Support
Senior review to the IMC, IPC, NEC, NFPA, AS/NZS 3000 and 3500, then site RFI support.
How Much Margin Are MEP Conflicts Quietly Costing You?
A two-minute Margin Assessment shows where your programs leak, in dollars, and what fully coordinated MEP could save.
Selected programs
Featured Work
MEP coordination and shop drawings delivered for contractors and engineers across the US and Australia.
-
Industrial
-
Commercial
Nashville Warehouse HVAC Coordination
Ductwork coordinated around roof steel, installed with zero field fixes or delays.
- Scale
- 1.4M sq ft warehouse, 1 floor
- Location
- Nashville, TN
-
Industrial
Chicago Manufacturing Plant Electrical
Cable tray routes fixed before install, avoiding field reroutes across the plant.
- Scale
- 1.6M sq ft plant, 2 floors
- Location
- Chicago, IL
What clients ask first
MEP Services: Common Questions
Straight answers from our engineering team. If your question isn’t here, ask us directly.
Ask a senior engineer An engineer replies within one business day.
Which MEP services do you provide?
MEP coordination, mechanical, electrical and plumbing BIM, and shop drawings for mechanical, electrical, plumbing and fire protection, plus plumbing spool drawings for prefabrication.
Which codes do you follow?
The IMC, IPC, NEC and NFPA for US projects, and AS/NZS 3000, AS/NZS 3500 and AS 2118 for Australian projects, alongside your project specifications.
Who is responsible for the design?
Design responsibility stays with your architect or engineer of record, who reviews and seals the work. Bimgraphix does not stamp drawings; we answer for every sheet matching your design inputs, and any gap is raised as an RFI, never guessed.
How fast can you start, and how is it priced?
Most programs start within a week. We quote per sheet, per model, per floor or per package and confirm the schedule in writing before work begins, so dates and costs are known on day one. You can start with one package and judge the quality before committing the full program.
Is our project information kept confidential?
Yes. We work under your NDA from the first file. Everything we produce belongs to you, is shared only through Autodesk Construction Cloud, Procore or a secure link, and is seen only by the team assigned to your project.
Start a conversation
Built for Programs Where Precision Is Never Optional.
For over 20 years, one standard has guided every model, drawing and component. Let’s talk about where your programs are losing margin.
Start Your Margin Assessment
Or write to info@bimgraphix.com
- Response within one business day
- Reviewed by a senior engineer
- Confidential