Commercial
Phoenix Data Center Mechanical
Duct fabrication released 2 weeks early, protecting the data center go-live date.
- Scale
- 72 MW data center, 4 floors
- Service
- Mechanical Shop Drawings
- Location
- Phoenix, AZ
Steel & Fabrication · Shop Drawings
Shop Drawings Approved the First Time
A rejected shop drawing delays fabrication; a wrong one costs a rebuild. We produce coordinated shop drawings checked against design, so approvals come fast.
See What Resubmittals Cost You- Approved fasterFewer resubmittals.
- Coordinated with every tradeFrom the federated model.
- Fabrication-readyCut lists and details.
- Checked before releaseSenior review on every sheet.
Mechanical Shop Drawings
Electrical Shop Drawings
Plumbing Shop Drawings
Fire Protection Shop Drawings
- 20+Years’ experience
- 1,500+Projects supported
- 350+Engineering professionals
- 80%Repeat clients
Where margin leaks
Rejected Shop Drawings Cost Your Margin
Shop drawings sit on the critical path. Every resubmittal holds up fabrication and the schedule.
Resubmittal Cycles
- Where margin leaks
- Drawings missing data bounce back from review while the schedule keeps slipping.
- What we fix
- Complete submittals checked against design and specs, approved first time.
Trades Out of Step
- Where margin leaks
- Shop drawings made in isolation clash with other trades once installation begins on site.
- What we fix
- Shop drawings from models coordinated with every trade, clashes cleared first.
Site Dimensions Ignored
- Where margin leaks
- Components fabricated to drawings that miss the building are scrapped or reworked.
- What we fix
- Site measurements and as-built conditions in every drawing, so parts fit first time.
Fabrication Delays
- Where margin leaks
- Shops wait on drawings, and installs wait on the shop, so every single delay compounds.
- What we fix
- Drawings released in the order your shop and site need, tracked against your schedule.
8 services, one team
Shop Drawings We Deliver
One senior-checked team delivers every service to your standards, so nothing falls between providers.
01Mechanical Shop Drawings
Ductwork shop drawings ready for fabrication, coordinated with all trades and checked to SMACNA, IMC and AS 4254.
Explore service- 02
Electrical Shop Drawings
Coordinated electrical shop drawings, checked to the NEC and AS/NZS 3000, so crews install right first time and pass inspection.
Explore service - 03
Plumbing Shop Drawings
Coordinated plumbing shop drawings, slopes, inverts and sleeves checked to IPC, UPC and AS/NZS 3500, so crews install once.
Explore service - 04
Fire Protection Shop Drawings
Fire protection shop drawings to NFPA 13 and AS 2118.1, coordinated with every trade for first-time approval and a single install.
Explore service 
05Facade Shop Drawings
Facade shop drawings ready to fabricate. Units, anchors and joints fit the structure, checked to ASTM, AAMA, AS 4284 and NCC.
Explore service
06ACP Panel Shop Drawings
ACP panel shop drawings for US and Australian facades, checked to NFPA 285, ASTM E84 and the NCC so panels fit first time.
Explore service
07Millwork Shop Drawings
Field-checked millwork shop drawings designers approve faster and shops build right, to AWI standards, ADA, AS 4386 and AS 1428.1.
Explore service
08Sheet Metal Shop Drawings
Sheet metal shop drawings and flat patterns checked to SMACNA, the IMC, AS 4254 and AS 1668, so parts come off the brake right.
Explore service
Who we work with
Built for the Teams
That Carry the Risk
MEP and Fire Contractors
Coordinated shop drawings your crews can install from.
Facade and Cladding Contractors
Panel layouts and fabrication details checked against the structure.
Millwork and Joinery Shops
Approval and production drawings with every dimension and finish.
General Contractors
Submittals that clear review and keep every trade moving.
- We work in
- Autodesk Revit
- AutoCAD
- Navisworks
- Inventor / SolidWorks
- Your templates and standards
How it works
From Brief to Release
One accountable team, a clear schedule and a senior check before anything is released.
- 01
Share Your Documents
Send drawings, specs and site measures. We confirm scope, standards and release dates.
- 02
Coordinate and Detail
Shop drawings produced from the coordinated model, by trade, to your drafting standards.
- 03
Check and Submit
Checked against design, specs and code, with a senior engineer review before any release.
- 04
Revise and Release
Review comments turned around fast. Sets released by erection sequence to the shop.
How Much Margin Are Resubmittals Quietly Costing You?
A two-minute Margin Assessment shows where your programs leak, in dollars, and what right-first-time shop drawings could save.
Selected programs
Featured Work
Shop drawings delivered for trade contractors and fabricators across the US and Australia.
-
Commercial
-
Commercial
Nashville Data Center Electrical Hall
Switchgear lineup installed with zero rework, energized on the planned date.
- Scale
- 60 MW data center, 4 floors
- Location
- Nashville, TN
-
Healthcare
Charlotte Regional Hospital Plumbing
Plumbing mains coordinated with fire protection, cutting RFIs by 40%.
- Scale
- 1.4M sq ft, 1,000 beds, 16 floors
- Location
- Charlotte, NC
What clients ask first
Shop Drawings: Common Questions
Straight answers from our engineering team. If your question isn’t here, ask us directly.
Ask a senior engineer An engineer replies within one business day.
Which shop drawings do you produce?
Mechanical, electrical and plumbing shop drawings, fire protection shop drawings, facade and ACP panel shop drawings, millwork shop drawings and sheet metal shop drawings.
How do you reduce resubmittals?
Every submittal is checked against the contract drawings, specifications and other trades before it goes out, and review comments are tracked to closure, so the same issue never comes back twice.
Who is responsible for the design?
Design responsibility stays with your architect or engineer of record, who reviews and seals the work. Bimgraphix does not stamp drawings; we answer for every sheet matching your design inputs, and any gap is raised as an RFI, never guessed.
How fast can you start, and how is it priced?
Most programs start within a week. We quote per sheet, per model, per floor or per package and confirm the schedule in writing before work begins, so dates and costs are known on day one. You can start with one package and judge the quality before committing the full program.
Is our project information kept confidential?
Yes. We work under your NDA from the first file. Everything we produce belongs to you, is shared only through Autodesk Construction Cloud, Procore or a secure link, and is seen only by the team assigned to your project.
Start a conversation
Built for Programs Where Precision Is Never Optional.
For over 20 years, one standard has guided every model, drawing and component. Let’s talk about where your programs are losing margin.
Start Your Margin Assessment
Or write to info@bimgraphix.com
- Response within one business day
- Reviewed by a senior engineer
- Confidential