Construction & BIM · BIM Services

One Coordinated Model. Every Trade Builds Once.

Every clash missed in the model becomes rework on site. We model architecture, structure and MEP together and resolve conflicts first, so trades build once.

See What Coordination Gaps Cost You
  • Every discipline modeledArchitecture, structure, MEP.
  • Clashes resolved earlyBefore crews mobilize.
  • Built to your standardsTemplates, LOD and BEP.
  • Checked before releaseSenior review on every model.
  • Multifamily residential buildings with balconies delivered from a coordinated architectural modelArchitectural BIM
  • Concrete frames of twin high-rise towers on a shared podiumStructural BIM
  • Coordinated HVAC ductwork running below a steel roof structureMechanical BIM
  • Overhead cable tray routed to electrical distribution boards in an industrial buildingElectrical BIM
  • 20+Years’ experience
  • 1,500+Projects supported
  • 350+Engineering professionals
  • 80%Repeat clients

Where margin leaks

Uncoordinated Models Cost Your Margin

Most field rework starts as a coordination gap missed in design. Every late clash costs days.

  • Clashes Found on Site

    Where margin leaks
    Clashes between structure and services surface at installation, when every fix costs the most.
    What we fix
    Every discipline federated and clash-checked zone by zone before drawings are issued.

  • Models That Stop at Design

    Where margin leaks
    Models are handed over and left behind, so site changes never make it back.
    What we fix
    Models kept live through construction, with RFIs and changes reflected in days.

  • Inconsistent Standards

    Where margin leaks
    Every consultant models differently, and the federated model cannot be trusted.
    What we fix
    Your templates, LOD and BIM execution plan applied to every model we touch.

  • Quantities You Cannot Trust

    Where margin leaks
    Estimates built from incomplete models put your bids, budgets and project margins at risk.
    What we fix
    Quantities taken directly from coordinated models, traceable to every element.

9 services, one team

BIM Services We Deliver

One senior-checked team delivers every service to your standards, so nothing falls between providers.

BIM Services

Who we work with

Built for the Teams
That Carry the Risk

  • General Contractors

    Coordinated models and clash reports that keep trades sequenced and the schedule intact.

  • Architects

    Design intent modeled accurately and coordinated with every consultant.

  • MEP and Structural Engineers

    Discipline models that fit the federated model the first time.

  • Developers and Owners

    Fewer change orders, and an as-built model you can operate from.

  • We work in
  • Autodesk Revit
  • Navisworks
  • BIM 360 / ACC
  • AutoCAD
  • Your BEP and standards

How it works

From Brief to Release

One accountable team, a clear schedule and a senior check before anything is released.

  1. 01

    Share Documents

    Send drawings, models, specs and your BIM execution plan. We confirm scope, LOD, dates.

  2. 02

    Model All Disciplines

    Architecture, structure and MEP modeled to your templates and standards.

  3. 03

    Coordinate, Check

    Clash detection by zone, issues tracked to closure, senior review before release.

  4. 04

    Construction Support

    RFI answers and model updates throughout construction, through to the as-built model.

How Much Margin Are Coordination Gaps Quietly Costing You?

A two-minute Margin Assessment shows where your programs leak, in dollars, and what fully coordinated BIM could save.

Request a Margin Assessment

Confidential. No commitment.

Selected programs

Featured Work

BIM delivered for contractors, design firms and developers across the US and Australia.

View all projects
  • Houston Executive Aviation Hangar: Business jet hangar with clear-span bay and two-floor office wing Aerospace

    Houston Executive Aviation Hangar

    Hangar, steel and office wing coordinated in BIM, built with zero site clashes.

    Scale
    48,000 sq ft hangar, 2-floor office wing
    Service
    Architectural BIM
    Location
    Houston, TX
  • Charlotte Medical Office Building: Concrete structure coordinated with fire protection and mechanical services Commercial

    Charlotte Medical Office Building

    Rebar and services coordinated before each pour, so every pour date was held.

    Scale
    480,000 sq ft, 12 floors
    Location
    Charlotte, NC
  • Nashville Warehouse HVAC Coordination: Coordinated HVAC ductwork running below a steel roof structure Commercial

    Nashville Warehouse HVAC Coordination

    Ductwork coordinated around roof steel, installed with zero field fixes or delays.

    Scale
    1.4M sq ft warehouse, 1 floor
    Location
    Nashville, TN

What clients ask first

BIM Services: Common Questions

Straight answers from our engineering team. If your question isn’t here, ask us directly.

Ask a senior engineer An engineer replies within one business day.
Which BIM services do you provide?

Architectural, structural, mechanical, electrical and plumbing BIM, clash detection, scan to BIM, quantity take-off and Revit family creation, delivered by one team in one coordinated model.

Which LOD and standards do you work to?

LOD 100 to 500 to suit the stage, following your BIM execution plan and templates, ISO 19650 workflows where required, and the codes your project is designed to, including the IBC and AISC in the US, and the NCC and Australian Standards in Australia.

Who is responsible for the design?

Design responsibility stays with your architect or engineer of record, who reviews and seals the work. Bimgraphix does not stamp drawings; we answer for every sheet matching your design inputs, and any gap is raised as an RFI, never guessed.

How fast can you start, and how is it priced?

Most programs start within a week. We quote per sheet, per model, per floor or per package and confirm the schedule in writing before work begins, so dates and costs are known on day one. You can start with one package and judge the quality before committing the full program.

Is our project information kept confidential?

Yes. We work under your NDA from the first file. Everything we produce belongs to you, is shared only through Autodesk Construction Cloud, Procore or a secure link, and is seen only by the team assigned to your project.

Start a conversation

Built for Programs Where Precision Is Never Optional.

For over 20 years, one standard has guided every model, drawing and component. Let’s talk about where your programs are losing margin.

Start Your Margin Assessment

Or write to info@bimgraphix.com

  • Response within one business day
  • Reviewed by a senior engineer
  • Confidential