Metal gates and fences

Get Every Gate Right Before Metal Is Cut

Unclear drawings mean recut panels, failed inspections and callbacks. Our code-checked shop drawings and 3D models deliver gates that fit and run smoothly.

See What Gate Rework Costs You
  • Built to codeUL 325, ASTM F2200 and AS 1926.
  • Fabrication-readyEvery frame, slat and hinge.
  • Coordinated with siteGrades, setbacks and driveways.
  • Checked before releaseSenior review on every set.
  • Dark horizontal-slat aluminum driveway gate between stone pillars at a modern homeEstate entry gates
  • Grey cantilever sliding gate with gear rack and operator motorAutomated sliding gates
  • Grey aluminum swing gate with diagonal infill pattern and matching slat fenceCustom pattern gates
  • Black vertical-bar sliding security gate between stone piersSecurity gates
  • 20+Years’ experience
  • 1,500+Projects supported
  • 350+Engineering professionals
  • 80%Repeat clients

Where margin leaks

Gate Rework Costs Your Margin

Gates and fences run hundreds of feet. Every drawing error repeats down the line as rework and callbacks.

  • Field Fit Problems

    Where margin leaks
    Panels and posts that miss grades, setbacks or driveways clash on site and are remade.
    What we fix
    Every run checked against the site plan, levels and boundaries, so panels fit first time.

  • Failed Inspections

    Where margin leaks
    Gates and pool fences that miss safety or wind rules fail sign-off and must be reworked.
    What we fix
    Drawings prepared to UL 325, ASTM F2200, AS 1926 and AS/NZS 1170, so sign-off comes first time.

  • Sagging and Binding Gates

    Where margin leaks
    Undersized frames, hinges or tracks bind and sag, and crews keep coming back unpaid.
    What we fix
    Frames, hardware and operator mounts sized and detailed first, so gates run smoothly.

  • Repeated Errors at Scale

    Where margin leaks
    One drawing error repeats across every panel on a long run, multiplying the rework cost.
    What we fix
    Standardized, checked drawings for every panel and gate type, so errors never repeat.
Slatted aluminum fence run with integrated pedestrian gate and mesh infill

What we deliver

Gate and Fence Drawings
Your Shop Can Build From

  • Shop Drawings

    Plans, elevations and sections of every run.

  • Fabrication Drawings

    Frames, slats and infill detailed piece by piece.

  • Gate and Operator Details

    Hinges, tracks, latches and motor mounts.

  • Post and Footing Details

    Post sizes, footings and anchorage for wind loads.

  • 3D Models and Renderings

    Models for design approval and client sign-off.

  • Cut Lists and BOMs

    Material, finish and hardware for every order.

  • We work in
  • SolidWorks
  • AutoCAD
  • Autodesk Inventor
  • Your templates and standards

How it works

From Survey to Install

Every run and gate is detailed and checked before metal is cut.

  1. 01

    Share Your Documents

    Send drawings, models and specs. We confirm scope, deliverables and dates in writing.

  2. 02

    Model and Detail

    Panels, posts, hinges and operators are detailed from survey data and checked for fit.

  3. 03

    Check and Release

    Senior review to UL 325, ASTM F2200, AS 1926 and AS/NZS 1170 before any release.

  4. 04

    Support Through Install

    Fast RFI answers and drawing updates through installation until the last gate swings.

How Much Margin Is Gate and Fence Rework Quietly Costing You?

A two-minute Margin Assessment shows where your gate and fence programs leak, in dollars, and what drawings built right the first time could save.

Request a Margin Assessment

Confidential. No commitment.

What clients ask first

Metal Gates and Fences: Common Questions

Straight answers from our engineering team. If your question isn’t here, ask us directly.

Ask a senior engineer An engineer replies within one business day.
What do your gate and fence drawings include?

Fabrication and installation drawings for steel and aluminum gates and fences: frames, infill, posts, footings, hinges, tracks and operator mounts, for swing, sliding, cantilever, automated, pedestrian and security gates.

Which codes do you follow, and who is responsible for the design?

UL 325, ASTM F2200 and ASCE 7 wind loads for US projects; AS 1926.1 and AS/NZS 1170.2 for Australian projects. Design responsibility stays with your engineer of record, who reviews and seals the work. Bimgraphix does not stamp drawings; we answer for every sheet matching your design inputs, and any gap is raised as an RFI, never guessed.

How do you make sure gates operate and pass inspection?

Swing paths, clearances, operator mounts and entrapment zones are checked against UL 325 or AS 1926, and post and footing layouts against the site plan, before an independent check and senior review.

Can you keep pace with a large, fast-moving program?

Yes. The team is sized to your program and work is released by site area or gate type, so nothing waits for the full set. Fees are priced per gate type or per run and fixed in the proposal with the schedule and revision rounds. You can start with one gate type to test the fit first.

Who owns the work, and how is our data handled?

You do. All models and drawings we create for you are your property. We sign your NDA before receiving files, exchange them through Autodesk Construction Cloud, Procore or a secure link, and limit access to your project team.

Start a conversation

Built for Programs Where Precision Is Never Optional.

For over 20 years, one standard has guided every model, drawing and component. Let’s talk about where your programs are losing margin.

Start Your Margin Assessment

Or write to info@bimgraphix.com

  • Response within one business day
  • Reviewed by a senior engineer
  • Confidential