Mezzanine platforms

Get Every Mezzanine Right Before Steel Is Cut

A mezzanine built from an unclear drawing risks rework and failed inspections. We check every steel member of our code-compliant drawings before release.

See What Mezzanine Rework Costs You
  • Built to codeIBC, OSHA, AISC and AS 1657.
  • Fabrication-ready steelEvery member and bolt.
  • Coordinated with siteRacking, doors and services.
  • Checked before releaseSenior review on every set.
  • Long steel mezzanine with stairs running the length of a large warehouseDistribution-scale mezzanines
  • Steel mezzanine with yellow handrails and storage inside a working facilityOperating facilities
  • Red steel mezzanine with cross-bracing, decking and stairBraced steel structures
  • Wide blue multi-bay steel mezzanine with cross-bracing and stairMulti-bay platforms
  • 20+Years’ experience
  • 150,000+Tons of steel detailed
  • 350+Engineering professionals
  • 80%Repeat clients

Where margin leaks

Mezzanine Rework Costs Your Margin

A mezzanine goes into a working facility. Each drawing error keeps floor space out of use.

  • Field Fit Problems

    Where margin leaks
    Columns, beams and decks that miss site conditions clash with racking, doors and services.
    What we fix
    Every member checked against the building, racking and existing services.

  • Permit and Code Delays

    Where margin leaks
    Drawings that miss IBC, OSHA or Australian Standards stall permits and inspections.
    What we fix
    Drawings prepared to IBC, OSHA, AISC and AS 1657 requirements before submittal.

  • Connection Errors

    Where margin leaks
    Wrong holes and connections send steel back to the shop and stall erection.
    What we fix
    Every connection, bolt pattern and plate detailed for fabrication, so erection keeps moving.

  • Lost Operating Time

    Where margin leaks
    Every extra day of installation keeps warehouse or plant space out of use and earning.
    What we fix
    Erection drawings that keep installation fast and in sequence, so the space opens sooner.
Grey steel mezzanine with yellow handrails, toe boards and stair in a warehouse

What we deliver

Mezzanine Drawings Your
Shop Can Build From

  • General Arrangement Drawings

    Plans, elevations and sections of the full platform.

  • Steel Fabrication Drawings

    Columns, beams and joists detailed piece by piece.

  • Connection Details

    Bolt patterns, base plates and welds set out clearly.

  • Stairs, Handrails and Gates

    Access and fall protection detailed to code.

  • Decking and Load Layouts

    Deck type, spans and design loads shown for every bay.

  • Erection Drawings

    Piece marks and sequence for fast, safe installation.

  • We work in
  • Tekla Structures
  • AutoCAD
  • Autodesk Revit
  • Your templates and standards

How it works

From Layout to Erection

Every platform is modeled and checked before steel is cut, so it installs without rework.

  1. 01

    Share Your Documents

    Send drawings, models and specs. We confirm scope, deliverables and dates in writing.

  2. 02

    Model and Coordinate

    Columns, beams and decks are checked against racking, services and clear heights.

  3. 03

    Check and Release

    Senior review to IBC, OSHA, AISC and AS 1657 before any erection drawing is released.

  4. 04

    Support Through Erection

    Fast RFI answers and drawing updates from layout through erection, until the floor is in use.

How Much Margin Is Mezzanine Rework Quietly Costing You?

A two-minute Margin Assessment shows where your programs leak, in dollars, and what platforms built right the first time could save.

Request a Margin Assessment

Confidential. No commitment.

What clients ask first

Mezzanine Platforms: Common Questions

Straight answers from our engineering team. If your question isn’t here, ask us directly.

Ask a senior engineer An engineer replies within one business day.
What do your mezzanine platform drawings include?

Fabrication and erection drawings for steel mezzanines: columns, beams, decking, connections, stairs and handrails, with anchor bolt plans and bills of material.

Which codes do you follow, and who is responsible for the design?

IBC, OSHA 1910 and AISC for US projects; AS 1657, AS 4100 and AS/NZS 1170 for Australian projects. Design responsibility stays with your engineer of record, who reviews and seals the work. Bimgraphix does not stamp drawings; we answer for every sheet matching your design inputs, and any gap is raised as an RFI, never guessed.

How do you make sure the platform fits the building?

Column positions, clearances and stair access are checked against the building layout, racking and equipment, before an independent check and senior review.

Can you keep pace with a large, fast-moving program?

Yes. The team is sized to your program and work is released by platform or bay, so nothing waits for the full set. Fees are priced per platform or per package and fixed in the proposal with the schedule and revision rounds. You can start with one platform to test the fit first.

Who owns the work, and how is our data handled?

You do. All models and drawings we create for you are your property. We sign your NDA before receiving files, exchange them through Autodesk Construction Cloud, Procore or a secure link, and limit access to your project team.

Start a conversation

Built for Programs Where Precision Is Never Optional.

For over 20 years, one standard has guided every model, drawing and component. Let’s talk about where your programs are losing margin.

Start Your Margin Assessment

Or write to info@bimgraphix.com

  • Response within one business day
  • Reviewed by a senior engineer
  • Confidential