Industrial
Dallas Central Plant Upgrade
1,240 clashes cleared before install, so the plant was built once with zero rework.
- Scale
- 1.2M sq ft campus, 18 MW plant, 12 floors
- Service
- MEP BIM Coordination
- Location
- Dallas, TX
Sectors · Construction
Build Once. Hold the Schedule. Keep the Margin.
On a large program, margin is lost one RFI, one clash and one idle crew at a time. We deliver coordinated models, shop drawings and take-offs, checked first.
See What Your Programs Are Losing- Fewer RFIsGaps closed before site.
- No field reworkTrades install once.
- Bids you can trustModel-based take-offs.
- Checked before releaseSenior review on every set.
MEP Coordination
Clash Detection
Builder’s Work Drawings
Structural Steel Detailing
- 20+Years’ experience
- 1,500+Projects supported
- 350+Engineering professionals
- 80%Repeat clients
Where margin leaks
Field Rework Erodes Contractor Margin
Most contractor margin is not lost in the bid. It is lost on site, after crews mobilize.
Clashes Found by Crews
- Where margin leaks
- Trades discover conflicts during install, and rework starts on site at the contractor's cost.
- What we fix
- Every trade federated and clash-checked zone by zone before release.
Late Subcontractor Drawings
- Where margin leaks
- Shop drawings arrive late or wrong, and installs wait while crews stand idle on site.
- What we fix
- Coordinated shop drawings produced to your sequence and checked first.
Openings Missed in the Pour
- Where margin leaks
- Sleeves and blockouts are cored after the pour, at a premium and with structural risk.
- What we fix
- Builder's work and lift drawings that locate every opening before concrete.
Estimates That Miss
- Where margin leaks
- Quantities taken from incomplete drawings put margin at risk from bid to final account.
- What we fix
- Take-offs measured from coordinated models, traceable to every item.
9 services, one team
Services for Construction
One senior-checked team delivers every service to your standards, so nothing falls between providers.
01MEP Coordination
MEP coordination of mechanical, electrical, plumbing and fire in one model. Every zone checked before crews mobilize, so trades install once.
Explore service- 02
Clash Detection
Clash detection across architecture, structure and MEP. Clashes prioritized and tracked to closure before crews mobilize, so you build once.
Explore service - 03
Builder’s Work Drawings
Builder’s work drawings that locate every sleeve, opening and blockout before the pour. Coordinated with MEP and structure to ACI 318 and AS 3600.
Explore service - 04
Structural Steel Detailing
Structural steel detailing: 3D models, shop and erection drawings, NC files to AISC 303, AWS D1.1 and AS/NZS 5131. Steel that fits.
Explore service 
05Mechanical Shop Drawings
Ductwork shop drawings ready for fabrication, coordinated with all trades and checked to SMACNA, IMC and AS 4254.
Explore service
06Electrical Shop Drawings
Coordinated electrical shop drawings, checked to the NEC and AS/NZS 3000, so crews install right first time and pass inspection.
Explore service
07Plumbing Shop Drawings
Coordinated plumbing shop drawings, slopes, inverts and sleeves checked to IPC, UPC and AS/NZS 3500, so crews install once.
Explore service
08Concrete Lift Drawings
Concrete lift drawings that sequence every pour, joint and embed, coordinated with rebar and checked to ACI 318 and AS 3600.
Explore service
09Quantity Take-off
Quantity take-offs from drawings and BIM models to MasterFormat, UniFormat and ASMM. Bid with confidence and keep margin.
Explore service
Who we work with
Built for the Teams
That Carry the Risk
General Contractors
Coordination and shop drawings that keep every trade on sequence.
Construction Managers
One coordinated model to manage trades, RFIs and changes.
Design-Build Firms
Design and construction documents from one accountable team.
Builders and Developers
Fewer change orders and projects that finish on time.
- We work in
- Autodesk Revit
- Navisworks
- Procore
- Autodesk Construction Cloud
- Bluebeam
- Related solutions
- BIM Services
- MEP Services
- Shop Drawings
- Construction Drawings
How it works
From Brief to Release
One accountable team, a clear schedule and a senior check before anything is released.
- 01
Share Your Program
Send drawings, models, schedule and specs. Scope and release dates confirmed.
- 02
Coordinate Every Trade
Structure and MEP federated and clash-checked by zone, before any drawing is released.
- 03
Detail and Check
Shop, builder's work and lift drawings to IBC, ACI 318 and NCC, checked before each release.
- 04
Support the Site
Fast RFI answers and drawing updates through to as-built, so the site never waits on paper.
How Much Margin Is Field Rework Quietly Costing Your Programs?
A two-minute Margin Assessment shows where your programs leak, in dollars, and what coordinated delivery could save.
Selected programs
Featured Work
Coordination and shop drawings delivered for general contractors across the US and Australia.
-
Industrial
-
Industrial
Dallas Hospital Central Plant
980 clashes resolved pre-construction, cutting RFIs 40% and holding schedule.
- Scale
- 1.1M sq ft hospital, 24 MW plant, 16 floors
- Location
- Dallas, TX
-
Commercial
Sydney Twin Residential Towers
2,400 openings coordinated before pours, with zero core drilling on site.
- Scale
- 820,000 sq ft, 2 towers, 16 floors
- Location
- Sydney, NSW
What clients ask first
Construction: Common Questions
Straight answers from our engineering team. If your question isn’t here, ask us directly.
Ask a senior engineer An engineer replies within one business day.
Which services do general contractors use most?
MEP coordination and clash detection, trade shop drawings, builder's work and concrete lift drawings, structural steel detailing and model-based quantity take-off, delivered by one team.
Can you work inside our project platform and schedule?
Yes. We work in Procore, Autodesk Construction Cloud or your own platform, follow your submittal and RFI processes, and release drawings in the sequence your schedule needs.
Who is responsible for the design?
Design responsibility stays with your architect or engineer of record, who reviews and seals the work. Bimgraphix does not stamp drawings; we answer for every sheet matching your design inputs, and any gap is raised as an RFI, never guessed.
How fast can you start, and how is it priced?
Most programs start within a week. We quote per sheet, per model, per floor or per package and confirm the schedule in writing before work begins, so dates and costs are known on day one. You can start with one package and judge the quality before committing the full program.
Is our project information kept confidential?
Yes. We work under your NDA from the first file. Everything we produce belongs to you, is shared only through Autodesk Construction Cloud, Procore or a secure link, and is seen only by the team assigned to your project.
Start a conversation
Built for Programs Where Precision Is Never Optional.
For over 20 years, one standard has guided every model, drawing and component. Let’s talk about where your programs are losing margin.
Start Your Margin Assessment
Or write to info@bimgraphix.com
- Response within one business day
- Reviewed by a senior engineer
- Confidential